|
We09A - Solid Mechanics and Design 1
|
|
|
We09A-1 P00008 (13:30 ~ 13:42) |
(Online) Optimization Design of a Wing Structure | |
| Jing-Fung Lin* (CTBC University of Technology) | ||
|
We09A-2 P00006 (13:42 ~ 13:54) |
(Online) Vibration Response Characteristics and Multidiscipline Optimization Using Stochastic Approach of Free Piston Engine Structures | |
| Nuraini Abdul Aziz* (Universiti Putra Malaysia), Ahmad Kamal M. Ihsan and Nordin Jamaluddin (Universiti Kebangsaan Malaysia) | ||
|
We09A-3 P00101 (13:54 ~ 14:06) |
Design Optimization of Vacuum Cleaner Intake Nozzle for Uniformed Suction Performance Based on Multi-Fidelity Surrogate Modeling | |
| Jinwoo Lee, Gunwoo Noh*, and Sangkyun Shin (Korea University) | ||
|
We09A-4 P00051 (14:06 ~ 14:18) |
Optimization and Evaluation of Spherical Tube Sheet Design for Steam Generator | |
| Seungmin Kim and Ihn Namgung* (KEPCO International Nuclear Graduate School) | ||
|
We09A-5 P00080 (14:18 ~ 14:30) |
A Novel Multi-Fidelity Kriging Surrogate Model and Optimization Strategy | |
| Sanghyun Cho, Inyeong Kang, Sangkyun Shin, and Gunwoo Noh* (Korea University) | ||
|
We09B - Solid Mechanics and Design 2
|
|
|
We09B-1 P00077 (14:40 ~ 14:52) |
(Online) Crack Problem in Laminated Composite Plates Reinforced by Carbon Nanotubes (CNT) | |
| Arda Çalışkan* and Mehmet Nurullah Balcı (Hacettepe University) | ||
|
We09B-2 P00007 (14:52 ~ 15:04) |
(Online) Effect of Numerical Model of Composite Plates on Failure Behavior for Hashin Failure Criterion Under Fatigue Loads | |
| Abdulkerim Parlamis* (Dicle HPP), Mete Onur Kaman (Firat University), Gurbet Orcen (Dicle University), Mustafa Albayrak (Inonu University), Serkan Erdem (Firat University) | ||
|
We09B-3 P00091 (15:04 ~ 15:16) |
The Effect of Shot Peening on the Fatigue Life of Hydrogen Embrittled Stainless Steel in Thermal Environment | |
| Eunbi Sim, Boseung Kim, and Taehyung Kim* (Cheongju University) | ||
|
We09B-4 P00087 (15:16 ~ 15:28) |
Effect of Shot Peening on Fatigue Crack Growth Retardation in Stainless Steel With Compressive Residual Stress | |
| Yujin Park (Cheongju University), Taehyung Kim* (Cheongju Univeristy) | ||
|
We09B-5 P00092 (15:28 ~ 15:40) |
Analytical Review of the Design Effectiveness of a Rotation Test Device for Regular Operation Inspection of Gas Turbine | |
| Juhyeok Jang and Taehyung Kim* (Cheongju University) | ||
|
We09C - Solid Mechanics and Design 3
|
|
|
We09C-1 P00085 (15:50 ~ 16:02) |
(Online) Study of Torque Transmission and Clearance of a Rotational Flexible Joint Implemented in a Planar Mechanism | |
| Raymundo Ramos Alvarado*, Fabiola Hernández Hernández, and Aylin Galindo Chávez (Universidad Politécnica de Querétaro) | ||
|
We09C-2 P00030 (16:02 ~ 16:14) |
(Online) Feasibility Study for Replacement of Babbitt Coating by Textured Surface in a Bush Bearing | |
| Nitish Singh Jammoria*, Raj Kumar Pandey, Deepak Kumar, and Dinesh Kalyanasundaram (Indian Institute of Technology Delhi) | ||
|
We09C-3 P00048 (16:14 ~ 16:26) |
Dynamic Assessment of Core Support Barrel and Reactor Vessel Interactions in Contact Conditions | |
| Niniek Ramayani Yasintha and Ihn Namgung* (KEPCO International Nuclear Graduate School) | ||
|
We09C-4 P00047 (16:26 ~ 16:38) |
Structural Integrity and Modal Analysis of a Slanted Contact Design Between Core Support Barrel and Reactor Vessel | |
| Pham Quang Hieu and Ihn Namgung* (KEPCO International Nuclear Graduate School) | ||
|
We09C-5 P00039 (16:38 ~ 16:50) |
A Study of Enhancing Seismic Resilience of Reactor Internals through Normal Contact between CSB and RV Outlet Nozzle | |
| Christopher Ondwasi Omondi and Ihn Namgung* (KEPCO International Nuclear Graduate School) | ||
|
We09D - Solid Mechanics and Design 4
|
|
|
We09D-1 P00103 (17:00 ~ 17:12) |
(Online) Experimental Study of 3D Polylactic Acid (PLA) Printed Part With Different Infill Patterns and Porosities | |
| Md Ashequl Islam, Nurul Ashikin Roslan, Khairul Salleh Basaruddin*, Nor Amalina Muhayudin, and Shah Fenner Khan (Universiti Malaysia Perlis), Tien-Dat Hoang (Ha Noi University of Industry) | ||
|
We09D-2 P00015 (17:12 ~ 17:24) |
(Online) Experimental and Computational Analysis of PLA Filled With Boron Nitride Nanoplatelets for Green Composite Fabrication | |
| Sundarasetty Harishbabu (VIT-AP University), Santosh Kumar Sahu* (VIT University-Andhra Pradesh) | ||
|
We09D-3 P00083 (17:24 ~ 17:36) |
Model Simplification Methods for PCB Warpage Prediction | |
| Yoonha Hwang, Hyunmo Jeong, Dongwoo Suh, Sangkyun Shin, and Gunwoo Noh* (Korea University) | ||
|
We09D-4 P00053 (17:36 ~ 17:48) |
Enhancement of FEM Shell Spacer Grid Model Using Experimental Data | |
| Minhee Kim and Ihn Namgung* (KEPCO International Nuclear Graduate School) | ||
|
We09D-5 P00114 (17:48 ~ 18:00) |
Investigation on the Mechanical Properties and Damage Accumulation of Plain-Woven Composites Using Acoustic Emission Technique at Elevated Temperatures | |
| Tao Zheng*, Hao Lu, and Licheng Guo (Harbin Institute of Technology) | ||
|
We10A - Thermal and Power Engineering 1
|
|
|
We10A-1 P00112 (13:30 ~ 13:42) |
(Online) Influence of Arc-Vane Baffles on Augmented Heat Transfer in a Rectangular Air Channel | |
| Piphatpong Thapmanee, Arnut Phila, and Somchai Sripattanapiptat (Mahanakorn University of Technology), Naoki Maruyama (Mie University), Masafumi Hirota (Aichi Institute of Technology), Varesa Chuwattanakul* (King Mongkut's Institute of Technology Ladkrabang), Smith Eiamsa-ard (Mahanakorn University of Technology) | ||
|
We10A-2 P00111 (13:42 ~ 13:54) |
(Online) Heat Transfer Performance Evaluation of a Solar Air Preheater Duct Fitted With Multiple Tapered V-Baffles | |
| Pichit Kaewkosum (King Mongkut's Institute of Technology Ladkrabang), Arnut Phila* and Khwanchit Woncharee (Mahanakorn University of Technology), Naoki Maruyama and Masafumi Hirota (Mie University), Warin Keaitnukul (Mahanakorn University of Technology), Chinaruk Thianpong (King Mongkut's Institute of Technology Ladkrabang), Smith Eiamsa-ard (Mahanakorn University of Technology) | ||
|
We10A-3 P00054 (13:54 ~ 14:06) |
(Online) Geometric Modifications for Improved Performance in Solid Oxide Electrolysis Cell | |
| Shehnaz Akhtar and Sang-Wook Lee* (University of Ulsan) | ||
|
We10A-4 P00046 (14:06 ~ 14:18) |
Numerical Investigation of Various Absorber Shapes Incorporating Phase Change Material in Solar Collector Application | |
| Binit Kumar, Abhishek Awasthi, and Yongseok Jeon* (Ajou University) | ||
|
We10A-5 P00028 (14:18 ~ 14:30) |
Impact of Surface Coating on Freshwater Generation From Solar Stills – A Comprehensive Review | |
| Mosab Elhassan* and Ravishankar Sathyamurthy (King Fahd University of Petroleum and Minerals) | ||
|
We10B - Thermal and Power Engineering 2
|
|
|
We10B-1 P00110 (14:40 ~ 14:52) |
(Online) Heat Transfer Augmentation in a Heat Exchanger Tube Installed With V-Shaped Ribbed Twisted Tapes | |
| Yuexiang Du, Prachya Samruaisin, and Khwanchit Wongcharee (Mahanakorn University of Technology), Varesa Chuwattanakul (King Mongkut’s Institute of Technology Ladkrabang), Smith Eiamsa-ard* (Mahanakorn University of Technology) | ||
|
We10B-2 P00104 (14:52 ~ 15:04) |
(Online) Analysis of Passive Greenhouse System for Aquaculture | |
| Manju Bhardwaj* and Shikha Singh (Shri Ramswaroop Memorial University) | ||
|
We10B-3 P00086 (15:04 ~ 15:16) |
(Online) Experimental Study on Thermal Performance Characteristics of 5S7P Battery Module With Immersion Cooling Under Fast Charging Conditions | |
| Tai Duc Le, Seong-Guk Hwang, Jung Su Park, Jun Chan Lee, and Moo-Yeon Lee* (Dong-A University) | ||
|
We10B-4 P00049 (15:16 ~ 15:28) |
A Multi-Fidelity Numerical Prediction for the Performance of a Multi-Water Inlet Cross-Flow Heat Exchanger | |
| Abera Tesfaye Eshete and June Kee Min (Pusan National University), Jong IL Park (HD Hyundai Heavy Industries), Man Yeong Ha* (Pusan National University) | ||
|
We10B-5 P00025 (15:28 ~ 15:40) |
Performance and Emission Characteristics of Fish Oil Methyl Ester in Direct Injection Diesel Engine With Hydrogen Enrichment - An Experimental Approach | |
| Ravishankar Sathyamurthy* (King Fahd University of Petroleum and Minerals) | ||
|
We10C - Thermal and Power Engineering 3
|
|
|
We10C-1 P00097 (15:50 ~ 16:02) |
(Online) An Experimental Strategy to Investigate the Effects of Carbon Nanotube Additions With WCO-Biodiesel and Diesel Blends on the Performance and Exhaust Emissions of Diesel Engines | |
| Rohit Singh* and Rajesh Kumar Porwal (Shri Ramswaroop Memorial University), Vijay Verma (BIET Jhansi) | ||
|
We10C-2 P00096 (16:02 ~ 16:14) |
(Online) Analyzing the Overall Performance & Emissions of Diesel Engines Through an Investigation of Diesel Engines Powered by Blends of MWCNTs & Neem Biodiesel | |
| Rohit Singh* and Rajesh Kumar Porwal (Shri Ramswaroop Memorial University), Vijay Verma (BIET Jhansi) | ||
|
We10C-3 P00070 (16:14 ~ 16:26) |
Quasi-Steady Simulation of Side-By-Side Household Refrigerator Considering Evaporator Frosting and Defrosting Effects | |
| Behnam Saeedi-Rizi (Isfahan University of Technology), Mahdi Nili-Ahmadabadi* (Pusan National University), Fatemeh Ghadiri-Modares (Snowa Tech.), Man Yeong Ha (Pusan National University) | ||
|
We10C-4 P00067 (16:26 ~ 16:38) |
Effectiveness of Immersion Cooling of Li-ion Battery Pack at High C-rate Charging and Discharging | |
| Mohammad Ali Yaqteen and Jin Sub Kim* (Korea Institute of Machinery and Materials) | ||
|
We10C-5 P00113 (16:38 ~ 16:50) |
Reconstruction and Enhancement of Physical Field Based on a Convolutional Autoencoder for Nanofluid Heat Transfer Problem | |
| Puneet Rana*, Junqi Chen, Bo Yu, and Gaurav Gupta (Wenzhou Kean University) | ||
|
We10D - Thermal and Power Engineering 4
|
|
|
We10D-1 P00079 (17:00 ~ 17:12) |
(Online) Theoretical Modeling of PV Integrated Greenhouse for Fish Farming | |
| Manju Bhardwaj* and Shikha Singh (Shri Ramswaroop Memorial University) | ||
|
We10D-2 P00057 (17:12 ~ 17:24) |
(Online) A Review of Natural Gas and Hydrogen Properties and Their Influence on Internal Combustion Engine Dynamics | |
| Girish Bhiogade* (Vignan's Institute of Information Technology Visakhapatnam), Shrikrushna Chincholkar (Kavikulguru Institute of Technology and Science Ramtek) | ||
|
We10D-3 P00045 (17:24 ~ 17:36) |
Effect of Copper Metal Foam on Performance Enhancement of PCM Based TES System | |
| Charmala Suresh and Yongseok Jeon* (Ajou University) | ||
|
We10D-4 P00038 (17:36 ~ 17:48) |
Physics-Constrained Machine Learning for Two-phase Heat Transfer | |
| Haeun Lee (Chung-Ang University), Cheonkyu Lee (Korea Institute of Industrial Technology), Hyoungsoon Lee* (Chung-Ang University) | ||
|
Th09C - Production Engineering
|
|
|
Th09C-1 P00106 (11:24 ~ 11:36) |
(Online) Optimization of Labor Time for Jeans Waistband Component Assembly at Vietnamese Textile Factories | |
| Thi Ngoc Anh La* and Tieu Thanh Le (Hanoi University of Science and Technology) | ||
|
Th09C-2 P00022 (11:36 ~ 11:48) |
(Online) The Reduction of Welding Discontinuity and Imperfections in Laser Welding of HC420LA Steel Sheets | |
| Cemil Kobak (Askon Demir Celik), Arzum Işıtan* (Pamukkale University) | ||
|
Th09C-3 P00061 (11:48 ~ 12:00) |
A Study on the Influence of Dimension and Thickness of a Unit Cell on Flow Characteristics in the TPMS Structure | |
| Gideon Simon Mduma, Dong-Gyu Ahn*, and Sung Yong Jung (Chosun University) | ||
|
Th09D - Semi-Plenary Lectures 2
|
|
|
Th09D-1 P00120 (13:00 ~ 13:30) |
[Semi-Plenary 2] (Online) Nanojoining for Device Integration | |
| Liu Lei* (Tsinghua University) | ||
|
Th09D-2 P00124 (13:30 ~ 14:00) |
[Semi-Plenary 2] Ethanol Application in Diesel Engines | |
| Sakda Thongchai* (Kasetsart University) | ||
|
Th09E - Solid Mechanics and Design 5
|
|
|
Th09E-1 P00109 (14:10 ~ 14:34) |
[Invited] Investigation of the In-Situ Performance Characterization Method of the Interface Within 3D Woven Composites | |
| Licheng Guo*, Qingsong Zong, and Tao Zheng (Harbin Institute of Technology) | ||
|
Th09E-2 P00013 (14:34 ~ 14:46) |
The Efficient Use of Highly Disconnected Meshes in Graph Neural Network Based Structural Solid Simulation | |
| Jozsef Adam Sebestyen and Do-Nyun Kim* (Seoul National University) | ||
|
Th09E-3 P00071 (14:46 ~ 14:58) |
A Stable Mixed Overlapping Element and Its Application | |
| Giseok Yun and Do-Nyun Kim* (Seoul National University) | ||
|
Th09E-4 P00081 (14:58 ~ 15:10) |
The Learned Gaussian Quadrature for a Continuum Mechanics Based 3D Beam Finite Element in Structural Analysis | |
| Yuyeong Kim, Minyeong Jang, and Sangkyun Shin (Korea University), Kyungho Yoon (Yonsei University), Gunwoo Noh* (Korea University) | ||
|
Th10B - Plenary Lectures
|
|
|
Th10B-1 P00117 (09:50 ~ 10:20) |
[Plenary] (Online) Rapid Evaluation of Fatigue Limit Based on Temperature Variation Under Cyclic Loading | |
| Hirotsugu Inoue* (Institute of Science Tokyo) | ||
|
Th10B-2 P00119 (10:20 ~ 10:50) |
[Plenary] (Online) Additive Manufacturing of Multiple Material and Graded Components Using Laser Powder Bed Fusion | |
| Li Lin* (Ningbo Institute of Materials Technology and Engineering) | ||
|
Th10C - Plenary Lecture / Semi-Plenary Lecture 1
|
|
|
Th10C-1 P00122 (11:00 ~ 11:30) |
[Plenary] Progress on Development of Pulverized Biomass Combustor | |
| Jarruwat Charoensuk* (King Mongkut's Institute of Technology Ladkrabang) | ||
|
Th10C-2 P00123 (11:30 ~ 12:00) |
[Semi-Plenary 1] Assessment of Heat Transfer Performance in a Channel Equipped With Tapered Baffles | |
| Smith Eiamsa-ard* (Mahanakorn University of Technology) | ||
|
Th10D - Semi-Plenary Lectures 3
|
|
|
Th10D-1 P00118 (13:00 ~ 13:30) |
[Semi-Plenary 3] (Online) Mechanical Characterization of Single and Group of Cells From Static to Dynamic Conditions | |
| Toshiro Ohashi* (Hokkaido University) | ||
|
Th10D-2 P00121 (13:30 ~ 14:00) |
[Semi-Plenary 3] (Online) Bioinspired Soft Robots for High Power Density and Multifunctional Applications | |
| Liu Chunbao* (Jilin University) | ||
|
Th10E - Thermal and Power Engineering 5
|
|
|
Th10E-1 P00056 (14:10 ~ 14:22) |
(Online) Thermal Regulation of Energy Equipment for CubeSat Format With Stem Cell Research Payload | |
| Kostiantyn Polovynkin* and Nataliia Sorokova (National Technical University of Ukraine (Igor Sikorsky Kyiv Polytechnic Institute)) | ||
|
Th10E-2 P00044 (14:22 ~ 14:34) |
Inlet Location’s Effect on the Melting of PCM and Pressure Reduction Inside the Flow Tubes | |
| Abhishek Awasthi, Yongseok Jeon*, Suresh Charmala, and Binit Kumar (Ajou University) | ||
|
Th10E-3 P00024 (14:34 ~ 14:46) |
Experimental Analysis of Basin Geometry on Yield of Additively Manufactured Portable Solar Stills | |
| Mohammad Abusalim, Mosab Elhassan, Ravishankar Sathyamurthy, and Usman Ali* (King Fahd University of Petroleum and Minerals) | ||
|
Th10E-4 P00020 (14:46 ~ 14:58) |
(Online) Experimental Analysis of Hemispherical Dome-Type Solar Still Using Hybrid Magnesium Oxide/CNT Nanoparticles Doped in Paraffin Wax as Thermal Energy Storage | |
| Ravishankar Sathyamurthy* and Hafiz Muhammad Ali (King Fahd University of Petroleum and Minerals) | ||
|
Th10E-5 P00073 (14:58 ~ 15:10) |
Analysis of the Characteristics of Blast Damage Based on the Large Scale Shock Tube | |
| Kyoungmin Kim*, Yoonkeon Kim, Sung-chul Park, Sewoong Jung, Jae-Eun Kang, and Seungjae Lee (Agency for Defense Development) | ||
|
Fr09B - Engineering Materials and Technology 1
|
|
|
Fr09B-1 P00102 (09:50 ~ 10:02) |
(Online) Effect of Polyamide 12 on Mechanical and Thermal Properties of PLA/PA 12 Blend | |
| Amir Yusuf Mohd Shukri, Muhammad Khairulamirin Hassan, Abdul Manaf Abdullah*, and Solehuddin Shuib (Universiti Teknologi MARA) | ||
|
Fr09B-2 P00052 (10:02 ~ 10:14) |
(Online) Optimization of Milling Process Parameters in AZ61 for Improved Surface Quality Under Oil and Cryogenic Coolants: Using RSM Based D-Optimal Method | |
| Muniraj S* and M Havinesh Kumar (Sri Venkateswara College of Engineering, Sriperumbudur, Tamil Nadu) | ||
|
Fr09B-3 P00099 (10:14 ~ 10:26) |
Enhanced Properties of SS316 Manufactured Using Direct Energy Deposition Method | |
| Sung Eun Kim* (Inha University), Hyun-gil Kim (Korea Atomic Research Institute) | ||
|
Fr09B-4 P00076 (10:26 ~ 10:38) |
Surface Weakening-Assisted Machining Inconel 718 by Te Infiltration | |
| Guoying Li* (China University of Petroleum (East China)), Bing Wang (Shandong University), Peng Yi (China University of Petroleum (East China)), Zhanqiang Liu (Shandong University) | ||
|
Fr09B-5 P00093 (10:38 ~ 10:50) |
Nickel Ferrite Nanoparticles: A Tri-functional Electrode Material for Energy Storage cum Energy Conversion for Sustainable Green Hydrogen Production | |
| Janakiraman Chennakrishnan, Vishal Natraj, Vigneshwaran Mohan, Parthiban Pazhamalai, and Sang-Jae Kim* (Jeju National University) | ||
|
Fr09C - Engineering Materials and Technology 2
|
|
|
Fr09C-1 P00041 (11:00 ~ 11:12) |
(Online) A New Aluminum Alloy Electromagnetic Flanging Process Based on the Synergistic Effect of Repulsive and Attractive Forces | |
| Xin Xu, Fenqiang Li, Jiawei Shu, Cuiyu Li, and Qianting Wang* (Xiamen University of Technology) | ||
|
Fr09C-2 P00034 (11:12 ~ 11:24) |
(Online) Bush Bearing Materials and Their Fabrication Aspects Along With Techniques Used for Performance Improvement: A Review With Prospects | |
| Nitish Singh Jammoria*, Raj Kumar Pandey, Deepak Kumar, and Dinesh Kalyanasundaram (Indian Institute of Technology Delhi) | ||
|
Fr09C-3 P00066 (11:24 ~ 11:36) |
Integrated Self-Charging Power System With Triboelectric Nanogenerator and Flexible Solid-State Supercapacitor for Wearable Electronics | |
| Vigneshwaran Mohan, Parthiban Pazhamalai, Vishal Natraj, and Sang-Jae Kim* (Jeju National University) | ||
|
Fr09C-4 P00105 (11:36 ~ 11:48) |
Unicondylar Knee Arthroplasty Algorithm Development and Cadaveric Validation | |
| Muhammad Sohail and Heung Soo Kim* (Dongguk University) | ||
|
Fr09C-5 P00116 (11:48 ~ 12:00) |
Midship Plate Scantling Optimization of Very Large Crude Carrier Using Metaheuristic Algorithm and Machine Learning-Based Surrogate Model | |
| Choongki Kim* (Korea University) | ||
|
Fr09D - Engineering Materials and Technology 3
|
|
|
Fr09D-1 P00036 (13:00 ~ 13:12) |
(Online) Study on the Evolution of Force Chains in W-Cu Powder Particles during Electromagnetic Pulse Radial Compaction | |
| Jiawei Shu, Fenqiang Li*, Xin Xu, and Qianting Wang (Xiamen University of Technology) | ||
|
Fr09D-2 P00021 (13:12 ~ 13:24) |
(Online) Digital Transformation of Agricultural Machinery | |
| Arzum Işıtan* and Ramazan Cagri Kutlubay (Pamukkale University) | ||
|
Fr09D-3 P00009 (13:24 ~ 13:36) |
(Online) Tensile and Flexural Properties of Thermoplastic Polyurethane Reinforced With Nanodiamond Using Experimental and FEM Method | |
| Markapudi Bhanu Prasad and Santosh Kumar Sahu* (VIT University-Andhra Pradesh) | ||
|
Fr09D-4 P00035 (13:36 ~ 13:48) |
Dynamic Microwave-Assisted Dealloying Based on Elemental Electronegativity Differences | |
| Guoying Li* (China University of Petroleum (East China)), Bing Wang (Shandong University), Peng Yi (China University of Petroleum (East China)), Zhanqiang Liu (Shandong University) | ||
|
Fr09D-5 P00019 (13:48 ~ 14:00) |
Lamb Waves-Based Damage Zone and Severity Identification in Laminated Composites Using Deep Learning | |
| Muhammad Muzammil Azad, Jaehyun Jung, and Heung Soo Kim* (Dongguk University) | ||
|
Fr09E - Dynamics, Vibration and Sounds
|
|
|
Fr09E-1 P00027 (14:10 ~ 14:22) |
(Online) Nonlinear Dynamics of a Geared Rotor System Supported by Active Magnetic Bearings | |
| Yao Huijun and Jawaid Iqbal Inayat-Hussain* (Universiti Tenaga Nasional) | ||
|
Fr09E-2 P00014 (14:22 ~ 14:34) |
(Online) Influence of Centrifugal Expansion on Bearing Stiffness in Motorised Spindles at High Speeds | |
| Shengli Tian, Shuang Gao*, Zhiwen Wang, and Yongliang Li (Chongqing Technology and Business University) | ||
|
Fr09E-3 P00037 (14:34 ~ 14:46) |
Physics Model Based Virtual Health Indicator for Remaining Useful Life Prediction of Rolling Bearings | |
| SunGeu Chae, Dayeon Jeong, Ki-Yong Oh, and Suk Joo Bae* (Hanyang University) | ||
|
Fr09E-4 P00074 (14:46 ~ 14:58) |
Variational Mode Decomposition-Based Crack Detection in a Beam Using Photographic Measurements | |
| Sachin Kumar Singh* (Indian Institute of Technology (ISM) Dhanbad), Ramnivas Kumar (Government Engineering College Jamui) | ||
|
Fr09E-5 P00107 (14:58 ~ 15:10) |
Wearable Soft TFO for Improving Gait Mechanics of Patients With Claw Toe | |
| Lana Abu Hassan and Hyung-Soon Park* (Korea Advanced Institute of Science and Technology) | ||
|
Fr09F - Micro/Nano Engineering and Technology 1
|
|
|
Fr09F-1 P00094 (15:20 ~ 15:32) |
Graphene Oxide as a Versatile Solid Lubricant: Tribological Performance Across Ambient and Humidity-Free Environments | |
| Mingi Choi and Ji-Woong Jang (Pusan National University), Jae-Il Kim and Young-Jun Jang (Korea Institute of Materials Science), Songkil Kim* (Pusan National University) | ||
|
Fr09F-2 P00089 (15:32 ~ 15:44) |
Self-Assembly of 2D-2D Nanohybrids of CoCr-Layered Double Hydroxides Hybridized With V4C3 MXene for High-Performance Extrinsic Supercapacitors | |
| Vivek Mohan More, Hongseok Youn, and Jinsung Rho* (Hanbat National University) | ||
|
Fr09F-3 P00088 (15:44 ~ 15:56) |
Facile Design of Robust and Flexible Light Absorber of CNT – Ecoflex Composite on Mogul Structure for Photothermal Effect | |
| Thuy-Kieu Truong, Thi Tu Linh To, Young Durk Park, Hongseok Youn, and Jinsung Rho* (Hanbat National University) | ||
|
Fr09G - Micro/Nano Engineering and Technology 2
|
|
|
Fr09G-1 P00068 (16:30 ~ 16:42) |
Evaluation of Defect in Ag Through Glass via Formed by Electrohydrodynamic Printing Process | |
| Hamza Hussain (Sungkyunkwan University), Dae-Hyun Cho (Gyeongsang National University), Doyoung Byun* (Sungkyunkwan University) | ||
|
Fr09G-2 P00043 (16:42 ~ 16:54) |
Development of Three-Dimensional IME Device Through Thermoforming Techniques | |
| Muhammad Irfan, Taikmin Lee*, Inyoung Kim, Uzair Ali, and Anton Nailevich Gafurov (Korea Institute of Machinery and Materials), Hyejin Park (Sungkyunkwan University), Jeongdai Jo and Pyoungwon Park (Korea Institute of Machinery and Materials), Su Yong Nam (Pukyong National University), Kyoung Min Kim and Sung Yong Kim (Tech University of Korea) | ||
|
Fr09G-3 P00016 (16:54 ~ 17:06) |
Graph Neural Networks for DNA Origami Shape Prediction | |
| Chien Truong-Quoc, Jae Young Lee, Kyung Soo Kim, and Do-Nyun Kim* (Seoul National University) | ||
|
Fr09G-4 P00011 (17:06 ~ 17:18) |
Fundamental Studies on the Annealing Effect of Microscopic Polycrystalline Ti-6Al-4V Alloy Structures via Molecular Dynamics Simulations | |
| Taeil Yi* (Kyungnam University) | ||
|
Fr10B - Robotics and Control 1
|
|
|
Fr10B-1 P00059 (09:50 ~ 10:02) |
(Online) New Perspectives on Impedance Control | |
| Yuancan Huang*, Nianfeng Shao, and Jia Lu (Beijing Institute of Technology) | ||
|
Fr10B-2 P00040 (10:02 ~ 10:14) |
Improvement of the Current Slope Estimation for Self-Sensing Magnetic Bearing | |
| Vu Ngoc Vo and Hyeong-Joon Ahn* (Soongsil University) | ||
|
Fr10B-3 P00082 (10:14 ~ 10:26) |
Bioinspired Electrolyte Membrane for Ionic Artificial Muscles | |
| Van Hiep Nguyen and Il-Kwon Oh* (Korea Advanced Institute of Science and Technology) | ||
|
Fr10B-4 P00075 (10:26 ~ 10:38) |
Empowering Human-Robot Interaction Through Large Language Models and Cloud-Edge Computing | |
| Hisham Abdalla and Deok-jin Lee* (Jeonbuk National University) | ||
|
Fr10B-5 P00017 (10:38 ~ 10:50) |
Development of a Condition Health Monitoring Strategy for Industrial Robotic Reducers from Traditional Approaches to Customized Deep Learning Models | |
| Izaz Raouf, Prashant Kumar, and Heung Soo Kim* (Dongguk University) | ||
|
Fr10C - Robotics and Control 2
|
|
|
Fr10C-1 P00100 (11:00 ~ 11:12) |
(Online) Four-Bar Linkage Path Synthesis Using Self-Adaptive Teaching-Learning Based Optimization With Evenness Factor Archive | |
| Spencer Troy Pesigan Cortez and Suwin Sleesongsom* (King Mongkut's Institute of Technology Latkrabang) | ||
|
Fr10C-2 P00042 (11:12 ~ 11:24) |
A Study on Web Dynamics Utilizing AI Tension Controls | |
| Uzair Ali, Anton Nailevich Gafurov, Muhammad Irfan, Inyoung Kim, and Taik-Min Lee* (Korea Institute of Machinery and Materials, University of Science and Technology) | ||
|
Fr10C-3 P00084 (11:24 ~ 11:36) |
Personalized Usability Evaluation of Lower Limb Exoskeleton for the Elderly based on the Characteristics of pHRI | |
| Pyojeong Lim, Soonwoong Hwang, and Wansoo Kim* (Hanyang University) | ||
|
Fr10C-4 P00012 (11:36 ~ 11:48) |
Investigating Human Emotional Responses to Auditory Stimuli Through Psychoacoustic Metrics, Facial Emotion Recognition, and Explainable AI | |
| Abeeb Opeyemi Alabi and Namcheol Kang* (Kyungpook National University) | ||
|
Fr10C-5 P00095 (11:48 ~ 12:00) |
Analytical Investigation of Bifurcations in Bistable Shock Isolators | |
| Jinhong Noh (Korea Advanced Institute of Science and Technology), Pilkee Kim (Jeonbuk National University), Yong-Jin Yoon* (Korea Advanced Institute of Science and Technology) | ||
|
Fr10D - Fluids Engineering 1
|
|
|
Fr10D-1 P00065 (13:00 ~ 13:12) |
(Online) Application of Mean Line Modeling to the Loss Impact and Sensitivity Analysis of a Combined Axial-Centrifugal Compressor | |
| Amin Anjomrouz and Ali Hajilouy Benisi* (Sharif University of Technology) | ||
|
Fr10D-2 P00108 (13:12 ~ 13:24) |
CFD Simulation of Natural Convection in a Hexagonal Annulus Using the Lattice Boltzmann Method Combined With a Smoothed Profile Method | |
| Suresh Alapati and Kwang-ll Jeong* (Kyungsung University) | ||
|
Fr10D-3 P00072 (13:24 ~ 13:36) |
Dynamic Measurement of Rotating Blade Deformation Using Point Cloud Matching Techniques | |
| Yukun Han (Pusan National University), Chong Pan (Beihang University), Kyung Chun Kim* (Pusan National University) | ||
|
Fr10D-4 P00115 (13:36 ~ 13:48) |
Aerodynamic Characteristic of Electric Ducted Propulsion Fan With Circumferential Intake Flow Deflector | |
| Hoang-Quan Chu and Trung-Kien Nguyen (Le Quy Don Technical University), Cong-Huan Nguyen, Binh-Nguyen Nguyen, Thai-Son Vu, Dong Nguyen, and Gia-Diem Pham (Hanoi University of Science and Technology), Kwang-Yong Kim (Inha University), Cong-Truong Dinh* (Hanoi University of Science and Technology) | ||
|
Fr10E - Fluids Engineering 2
|
|
|
Fr10E-1 P00064 (14:10 ~ 14:22) |
(Online) Mean Line Model Development for Performance Prediction of Combined Axial-Centrifugal Compressors | |
| Amin Anjomrouz and Ali Hajilouy Benisi* (Sharif University of Technology) | ||
|
Fr10E-2 P00069 (14:22 ~ 14:34) |
Shape Optimization of Dragonfly-Inspired Corrugated Airfoils in Low-Reynolds Flow Regimes via Genetic Algorithm | |
| Mohammad Ali Forouzesh (Isfahan University of Technology), Mahdi Nili-Ahmadabadi* and Man Yeong Ha (Pusan National University) | ||
|
Fr10E-3 P00063 (14:34 ~ 14:46) |
Acoustic Noise Analysis in Circular Pipes With Varying Cross-Sectional Area | |
| Adarsh Rajasekharan Nair* and Hyun Sik Yoon (Pusan National University) | ||
|
Fr10E-4 P00062 (14:46 ~ 14:58) |
CFD Study of Flow Behavior in a Shape-Changing Nozzle for Fused Filament Fabrication (Fff) | |
| Quoc-Viet Le and Dong-Wook Oh* (Chosun University) | ||
|
Fr10F - Fluids Engineering 3
|
|
|
Fr10F-1 P00058 (15:20 ~ 15:32) |
(Online) Experimental Investigation of Ignition and Combustion Dynamics of Ethane-Oxygen Mixtures Using Spark Ignition Systems | |
| Joshua R. and J. Sharon* (Karunya Institute of Technology and Sciences) | ||
|
Fr10F-2 P00055 (15:32 ~ 15:44) |
A New Corresponding-States Principle Equation for Real Hydrogen Under Ultra-High-Pressure Considering Molecular Association | |
| Ruiyao Tao*, Yaobao Yin, Xiaoxue Liu, and Xinyi Wang (Tongji University), Huiyun Xu, Hailong Xue, and Yuqi Han (FTXT Energy Technology Co. Ltd.) | ||
|
Fr10F-3 P00050 (15:44 ~ 15:56) |
Design Optimization of Crossflow Air Turbine for Wave Energy Conversion in Oscillating Water Columns | |
| B.H.B.P.D. Baddegamage, Seong Jong Bae, Seung Hyun Jang, and Min Yoon* (National Korea Maritime and Ocean University) | ||
|
Fr10F-4 P00032 (15:56 ~ 16:08) |
4D Flow Mri- Based Non-invasive Cardiovascular Personalized Lumped Parameter Model and Hemodynamic Assessment in Aortic Stenosis | |
| Misbah Khan, Hyeon-Woo Park, and Hojin Ha* (Kangwon National University) | ||
|
Fr10G - Fluids Engineering 4
|
|
|
Fr10G-1 P00031 (16:30 ~ 16:42) |
Underlying Drag-Reduction Mechanisms of Hydrophobic Surfaces in Turbulent Flow | |
| Jae Sung Park* (University of Nebraska-Lincoln), Simon Song (Hanyang University), Alexander J Rogge (University of Nebraska-Lincoln) | ||
|
Fr10G-2 P00029 (16:42 ~ 16:54) |
Application of U-Net-Enhanced Fourier Neural Operation for Solving Vortex Shedding and Bubble Rising Problems | |
| Kien Van Phung, Tam Minh Tran, Seokyong Lee, and Sanghun Choi* (Kyungpook National University) | ||
|
Fr10G-3 P00026 (16:54 ~ 17:06) |
Study of Fractal Geometry Applied on Rectangular Fins With Application in Processors Cooling System | |
| Mahmoud Rasti, Kyung Chun Kim*, and Se Chul Oh (Pusan National University) | ||
|
Fr10G-4 P00023 (17:06 ~ 17:18) |
Vortex Flow Control in a Francis Draft Tube With Radially Adjustable Rods in a 200 MW Francis Prototype | |
| Michel Jose Cervantes*, Joel Sundström, and Shahab Shiraghaee (Luleå University of Technology) | ||